Clay Extruder – Table Model
The clay extruder is a tabletop model consisting of a holder (mounted with 4 included screws), an extrusion tube, a press, two rails with dies, and a wooden rod used to turn the press.
The product is designed to be easy and quick to disassemble and simple to clean.
Included are 2 rails, each with 4 dies (see image of included rails):
Four round dies in 20, 18, 16, and 14 mm
Four slightly rounded rectangular dies in 20, 18, 16, and 14 mm
Rails with other die shapes are available for purchase. Each die is marked with the maximum diameter of the shape, making it easy to choose the desired size.
The clay extruder has a capacity of approximately 225 ml and produces coils between 50–90 cm in length, depending on the die used.
Included in the package:
-
Clay extruder
-
Holder (table-mounted with 4 screws)
-
Wooden rod
-
2 rails, each with 4 dies
-
4 screws
-
Assembly instructions
Good to know:
Always use soft, well-prepared clay with the right amount of elasticity so it can be shaped properly by the clay extruder.
Remember to disassemble the press after use so the clay doesn’t harden inside – wash it after each use. If clay residue hardens inside the press, first moisten it and then clean with a soft sponge once the clay has softened again.
Do not use more force than necessary – let the clay extruder do the work to avoid damaging the mechanism.
